
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X70-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X70-50B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 70 mm stroke that an external stop screw trims on site by up to 50 mm, giving a usable extend range of 20-70 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The male rod thread (B code) on the 25 mm S45C hard-chrome rod bolts straight into male-threaded tooling.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm force class fits heavy clamping stations and press fixtures where a full-length profile body will not. The hard-anodized aluminium body carries a fixed TPU bumper at both ends, and the optional -S magnet enables CMSE / DMSE switches if end-position sensing is added later.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X70-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps large castings or weldments in machining fixtures, using the 20-70 mm trimmed extend range to suit varied part heights while delivering over 6 kN of clamp force at 0.5 MPa.
Pushes heavy pallets or bins on transfer lines; at 0.5 MPa the 6135.9 N extend force moves loads in the 300 kg class with margin, and the male rod thread suits clevis-linked pushers.
Size against neighbours: the 100 mm bore pushes 3927.0 N at 0.5 MPa, while stepping up is not possible within the series, so 125 mm is the top force class at 6135.9 N. If the job needs a shorter stroke, the -50 window lets you trim the 70 mm extend stroke down to 20 mm without reordering. Remember the stop screw is an end stop only - on air loss the piston still drifts, so add a separate valve solution where a load must be held. FA flange or LB foot mountings bolt to the ISO 21287 face, and order the -S code if CMSE / DMSE switch detection is required.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, air filtered to 40 um, and -20 to +70 C temperature range. The 70 mm stroke is trimmed by the stop screw within the ordered 50 mm window (20-70 mm usable), the port is 1/4" PT, and the rod end is male thread (B).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, threaded aluminium covers and a fixed TPU bumper at each end that decelerates the piston at the ends of travel. The external stop screw shortens the extend stroke on site within the 50 mm window - it does not lengthen it past 70 mm and it is not a mid-stroke lock. Position sensing requires the optional -S magnet code; this model (no S) has no magnet, so CMSE / DMSE switches cannot be fitted unless -S is ordered.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.