verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke75 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$215.17 $233.38Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB

The ACEJ125X75-20SB is a double acting, adjustable-stroke compact cylinder built to ISO 21287. The -20 code adds an external stop screw that trims the extend stroke anywhere in a 20 mm window, so the same cylinder covers 55-75 mm without re-ordering. The hard-anodized aluminium body keeps the mounting length about 50% shorter than an ISO 15552 profile cylinder, which matters when a 75 mm stroke must fit inside a deep draw die, a press fixture or a guarded gantry.

The S code means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clipped onto the body slot for end-of-stroke signals. A male rod thread (the B code) suits clevis and knuckle fittings, a fixed TPU bumper sits at both ends, and speed runs 30-500 mm/s across 0.15-1.0 MPa (22-145 psi) of clean, 40 um filtered air.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke75 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×75Stroke length in mm.
-20Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB the Right Cylinder?

If your load needs less than about 3700 N of working force, step down to the 100 mm bore and save air consumption; if you need the full 1251.4 kgf theoretical class, this is the bore that carries it. Remember the stop screw only shortens the extend stroke within the 20 mm window and drifts on air loss, so add a separate locking method if the load must be held. FA flange or LB foot mounts bolt to the ISO 21287 face, and the fitted -S magnet pairs with CMSE / DMSE switches; the 1/4" port and male M16x2.0 rod thread come fixed by the bore.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa it pushes 8590.3 N and pulls 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -20 code sets a 20 mm adjustment window: an external stop screw shortens the 75 mm extend stroke to any length from 55 to 75 mm. It is a mechanical end stop only, so the piston still drifts if air is lost, and the fixed TPU bumpers simply decelerate each end of travel.

The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 75 mm stroke cylinder fits shallow fixtures and guarded frames. The S code means the magnet is fitted on this model, letting CMSE / DMSE reed or solid-state switches ride the body slot for position signals. FA flange and LB foot mounts bolt to the standard face, the rod end is male thread, the port is 1/4", and operation spans 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-20SB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X75-20SB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.