
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X75-30SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X75-30SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 75 mm stroke by up to 30 mm on site, giving a usable range of 45-75 mm without swapping the cylinder. The male (B) rod thread and the fitted -S magnet, which accepts CMSE / DMSE switches, are both built into this variant.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore actuator has to sit inside a guard or between press platens. A fixed TPU bumper at each end absorbs end-of-stroke shock, the hard-anodized aluminium body runs on an S45C hard-chrome 25 mm rod, and the 1/4" ports feed speeds of 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Roughly 3682 N of practical clamping force at 0.5 MPa holds aluminium or iron castings against hard stops, while the short body fits inside fixture plates where a full-length profile cylinder will not.
The pull force of 5890.5 N at 0.5 MPa raises heavy pallet stops and lifters of about 300 kg class weight, and the fitted -S magnet with CMSE / DMSE switches confirms up and down positions to the PLC.
At 0.5 MPa this bore pushes 6135.9 N, well above the 3927.0 N of a 100 mm bore and far beyond the 2513.3 N of an 80 mm bore, so step down one size if your load is under about 3700 N of real work. If you need more theoretical muscle, the same frame reaches 1251.4 kgf at 1.0 MPa. Remember the stop screw only shortens the extend stroke within the 30 mm window; it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. Mount with FA flange or LB foot on the ISO 21287 face, and since the -S magnet is fitted, CMSE / DMSE switches can be added for end-of-stroke sensing right away.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 75 mm extend stroke by up to 30 mm, so the working range is 45-75 mm. It is double acting, runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, and the stop is an end stop only, not a load-holding lock.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, an S45C hard-chrome 25 mm rod and a fixed TPU bumper at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots, and the B code gives a male rod thread. FA flange and LB foot mounts bolt to the standard ISO 21287 face; the 1/4" ports are PT threaded.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.