
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X75-40SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X75-40SB is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 75 mm stroke that can be trimmed on site by up to 40 mm, giving a usable extend range of 35-75 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N; at 0.7 MPa those figures rise to 8590.3 N and 8246.7 N, with a theoretical ceiling of 1251.4 kgf at 1.0 MPa. As a rule of thumb, plan on roughly 3682 N (about 375 kgf) of real work at 0.5 MPa rather than the full rating.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore press or clamp must fit inside a tight welding fixture or machine guard. The male rod thread (B code) bolts directly to your tooling, and because this model carries the -S magnet, CMSE or DMSE reed and solid-state switches can be fitted for end-of-stroke signalling. A fixed TPU bumper at each end absorbs end-of-stroke impact, and the hard-anodized aluminium body with an S45C hard-chrome plated 25 mm rod stands up to heavy cycling.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X75-40SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body slots under low conveyor frames where a full-length profile cylinder will not fit, clamping pallets with about 3682 N of usable force at 0.5 MPa.
Male rod thread and FA flange mounting make it a direct clamp arm actuator for robotic welding cells, with CMSE switches on the -S magnet confirming clamp closure to the PLC.
Remember the -40 stop screw only shortens the extend stroke; it is a mechanical end stop, not a mid-stroke lock, so the rod will still drift if air is lost. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the ISO 21287 face, and PT ports take standard 1/4" fittings.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull is 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 75 mm extend stroke to any value from 35 to 75 mm. It is a mechanical end stop only, so it never locks the load if air pressure drops. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight jigs and guards. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped into the body slots for position feedback. Mounting is via FA flange, LB foot or FTC brackets, with I and Y rod knuckles for the male-threaded 25 mm rod. Port size is 1/4" PT, and the aluminium body carries a hard-chrome plated S45C rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.