
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X80-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ125X80-10B pairs a 125 mm bore with an 80 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, placing it at the top of the ACEJ force range for heavy presses, clamps and lift fixtures. The external stop screw trims the extend stroke by up to 10 mm on site, so the usable extend range is 70-80 mm without changing the cylinder.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore must fit inside a press frame or weld fixture. Running spec: 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, fixed TPU bumper at both ends. This unit has no magnet; order the optional -S code if you need CMSE / DMSE switch sensing.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X80-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Roughly 50% shorter mounting length than an ISO 15552 profile cylinder lets this 125 mm bore sit inside tight weld gantry beams, with LB foot or FA flange mounting.
If your fixture needs position feedback, order the -S variant so CMSE / DMSE switches can be fitted; this B-code unit carries no magnet. FA flange, LB foot and I/Y rod knuckles bolt to the ISO 21287 face. Remember the stop screw is a mechanical end stop for the extend stroke only: on air loss the piston drifts, so add a separate valve or lock for load holding.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N. The theoretical maximum is 1251.4 kgf at 1.0 MPa. The extend stroke is 80 mm and the stop screw trims it by up to 10 mm, giving a 70-80 mm range. Air supply is 0.15-1.0 MPa (22-145 psi) filtered to 40 um, speed 30-500 mm/s, port 1/4" PT, male rod thread (B code).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. An external stop screw shortens the extend stroke within the ordered 10 mm window; it is an end stop, not a mid-stroke lock. Switches: this model has no magnet. Order the optional -S code to enable CMSE / DMSE reed or solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.