
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X80-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder, the ACEJ125X80-30B pairs a 125 mm bore with an 80 mm stroke that an external stop screw trims by up to 30 mm, giving a usable extend range of 50-80 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, and the male rod thread (B code) bolts straight to tooling. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into heavy presses and gantries where a full-length body will not fit.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke energy, and 1/4" ports feed it at 0.15-1.0 MPa (22-145 psi) with speeds of 30-500 mm/s. Note there is no magnet fitted; order the optional -S code if CMSE / DMSE switches are needed later.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X80-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The male-threaded 25 mm rod drives a heavy diverter gate through an 80 mm throw, trimmed shorter via the stop screw, with the fixed TPU bumper softening each end.
Choose the -30 window only if your stroke may vary between 50 and 80 mm; the stop screw shortens the extend stroke, it never lengthens it. The adjuster is a mechanical end stop, not a mid-stroke lock, so the piston still drifts on air loss. Mount via FA flange or LB foot on the ISO 21287 face, and remember the magnet is the optional -S code, not a default.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N and pull to 8246.7 N. The theoretical maximum is 1251.4 kgf at 1.0 MPa. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), from -20 to +70 C at 30-500 mm/s, with a 30 mm adjustable window on the 80 mm stroke.
An external stop screw shortens the extend stroke by up to 30 mm, so the usable range is 50-80 mm; it cannot extend past 80 mm and it does not hold a load on air loss. The body is a hard-anodized aluminium ISO 21287 compact build about 50% shorter in mounting length than an ISO 15552 profile cylinder, with FA/LB mounting options. This unit has no magnet; order the optional -S code to enable CMSE / DMSE switch detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.