
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X80-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X80-50B is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 80 mm stroke by up to 50 mm on site, giving a usable range of 30-80 mm without changing the cylinder. At 0.5 MPa the 125 mm bore pushes 6135.9 N and pulls 5890.5 N, so a practical plan is roughly 3680 N (about 375 kg) of real work once a 40% reserve is kept. The male rod thread (B code) bolts straight to tooling, and the port is 1/4" PT.
The hard-anodized aluminium body with an S45C hard-chrome plated 25 mm rod runs at 30-500 mm/s on air filtered to 40 um, from 0.15-1.0 MPa (22-145 psi). The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in heavy presses and gantries where every millimetre of envelope counts. A fixed TPU bumper at each end absorbs end-of-stroke impact, and FA flange or LB foot mounts drop onto the standard ISO 21287 face.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X80-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
A 125 mm bore gives about 375 kg of usable work force at 0.5 MPa, enough to stamp batch codes into hardwood pallet boards inside a tight guard envelope.
The 50 mm adjustment window lets a die-setter trim the extend stroke between 30 and 80 mm to seat locating pins on 25 mm rod tooling without swapping cylinders.
Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock: on air loss the piston still drifts, so add external stops or a valve solution for load holding. Order the -S code if you later need CMSE / DMSE switches; this model has no magnet fitted.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N with pull at 8246.7 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -50 code means an external stop screw shortens the 80 mm extend stroke by up to 50 mm, so the working range is 30-80 mm. The rod is 25 mm with a male thread, the port is 1/4" PT, and speed is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits crowded press frames and gantries. FA flange and LB foot mounts bolt to the standard face. This version has no magnet, so no CMSE or DMSE switch can be read on it; order the optional -S magnet code at purchase if end-position sensing is needed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.