
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X80-75SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X80-75SB is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 80 mm stroke by up to 75 mm, giving a usable range of 5-80 mm without changing the cylinder. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, so as a working figure plan on roughly 3682 N (about 375 kg) of real force at 0.5 MPa rather than the full rating.
The hard-anodized aluminium body with a 25 mm S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 125 mm bore must fit inside a press fixture or gantry with limited depth. This -S model carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be clamped onto the body for end-of-stroke signalling, and the male (B) rod thread bolts straight to external tooling.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X80-75SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
The short ISO 21287 body fits inside tight weld-cell gantries where a full-length profile cylinder will not reach, and the male rod thread picks up custom clamp arms directly.
If you need more than 6135.9 N, this 125 mm bore is the largest in the series, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. Remember the stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve if the load must stay put. FA flange or LB foot mounts and I/Y rod knuckles suit heavy fixtures, and the fitted -S magnet enables CMSE / DMSE switch position feedback.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N and pull to 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 80 mm extend stroke by up to 75 mm, so the usable range is 5-80 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a 1/4" PT port and fixed TPU bumpers at both ends.
The hard-anodized aluminium body and 25 mm hard-chrome rod save about 50% of the mounting length of an ISO 15552 profile cylinder, so the 125 mm bore fits shallow fixtures and gantries. Because this model carries the -S code, the magnet is fitted and CMSE / DMSE reed or solid-state switches can be mounted in the body slots for position feedback. FA flange and LB foot mounts plus I/Y rod knuckles bolt to the standard ISO 21287 face, and the TPU bumper decelerates the piston at each end of travel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.