
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X90-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X90-10B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 90 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 80-90 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits presses and gantries that cannot house a full-length body.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome rod with a male thread (B code), and the fixed TPU bumper at each end absorbs end-of-stroke energy. This unit has no magnet fitted; order the optional -S code if you later need CMSE / DMSE switch positions.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps large castings for milling or drilling; the short ISO 21287 body slots between fixture rails where a longer profile cylinder would foul the spindle envelope.
Presses bearings into housings with about 3682 N of practical working force, and the adjustable extend end lets one cylinder serve several part heights without shimming.
If your stroke may change after commissioning, the 10 mm window suits fine trimming; wider windows (20-100 mm) exist if the process needs more range. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and PT ports take standard fittings. Remember the stop screw sets the extend end position only - it is not a mid-stroke lock, so the rod can drift if air is lost.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N (pull 8246.7 N), with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code means an external stop screw shortens the 90 mm extend stroke by up to 10 mm, so the working range is 80-90 mm. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, a 25 mm hard-chrome-plated S45C rod with male thread, 1/4" PT ports and a fixed TPU bumper at both ends. Mounting options include FA flange, LB foot and FTC brackets plus I/Y rod knuckles. Sensing requires the optional -S magnet code; this model (no S) has no magnet, so CMSE / DMSE switches cannot be fitted unless you order the -S version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.