
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X90-40B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X90-40B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 90 mm stroke that an external stop screw trims on site within a 40 mm window, giving a usable extend range of 50-90 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N, and the theoretical maximum at 1.0 MPa is 1251.4 kgf. The male (B code) 25 mm rod ends in a male thread for direct fixture bolting.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-force class fits presses and gantries where a full-length body cannot. The hard-anodized aluminium body carries a fixed TPU bumper at each end, and the optional -S magnet enables CMSE / DMSE switches - this unit ships without it.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-40B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
In a warehouse strapping head, the 125 mm bore clamps pallet loads with about 375 kg of usable force at 0.5 MPa, and the short body fits inside the guard frame.
On a machining-line fixture, the male-thread rod drives ejector plates through I or Y knuckles, with the 50-90 mm trimmed range tuned per part number.
If the job needs a fixed stroke instead of an on-site trim, the plain ACE125X90 covers it; the TACE twin-guide variant suits non-rotating tooling. Mount on the ISO 21287 face with FA flange or LB foot brackets, and add I or Y rod knuckles to the male thread. Remember the stop screw is an end stop only: on air loss the piston drifts, so it never holds a load. Order the -S code if CMSE / DMSE position sensing is required.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 90 mm extend stroke on site, so the usable range is 50-90 mm. It cannot lengthen the stroke past 90 mm, and the stop is not a mid-stroke lock - on air loss the piston still drifts.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 25 mm rod, fixed TPU bumpers at both ends, FA/LB mounting options and a 1/4" PT port. Position sensing requires the optional -S magnet ordered with the cylinder; without it no magnet is fitted, so CMSE or DMSE switches cannot be used. This model (no S code) has no magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.