
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X100SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 100mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X100SBT is a double-acting JIS compact cylinder engineered for substantial thrust, generating 3927 N of push force and 3524.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body architecture drastically reduces axial mounting depth compared to round-body alternatives, saving valuable machine footprint in heavy-duty assemblies.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B, M26x1.5) that couples directly to tooling. The hard-anodized 100mm bore operates at speeds from 30-500 mm/s, relying on fixed NBR elastomer bumpers at each end to decelerate the stroke rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X100SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Applies up to 5497.8 N of extend force at 0.7 MPa to secure heavy injection mold halves within a short axial mounting envelope.
Utilizes the 100mm stroke and male M26x1.5 rod thread to drive and hold heavy sheet metal blanks prior to a stamping operation.
Deploys the integrated magnet with a solid-state switch to confirm full extension of a 801 kgf locking arm inside machining fixtures.
Selecting this 100mm bore provides a maximum push of 801 kgf at 1.0 MPa. If you need slightly less force, the 80mm bore yields 2513.2 N push at 0.5 MPa; stepping up is not possible as this is the largest standard diameter before the big-bore 125mm tier (6135.9 N push). Keep in mind a plain ACQ does not hold its load if air pressure drops or the valve centers—the rod drifts, and the fixed NBR bumper only softens the end stop. For a fail-safe hold, specify an external rod lock or pilot-operated check valve. To order, confirm the essentials: 100mm bore, 100mm stroke, NPT3/8 port, S magnet, and B male-thread rod.
Quick checklist
At 0.5 MPa, this 100mm bore double-acting cylinder provides 3927 N of push force and 3524.8 N of pull force. At 0.7 MPa, the push force is 5497.8 N, with a maximum push of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
No, the ACQ100X100SBT uses fixed NBR elastomer bumpers at each end to absorb the end stop, not an adjustable air cushion. For high-speed impacts, slow the approach or add an external shock absorber. Additionally, it does not hold its position if air is lost; an external rod lock is required for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.