
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X100ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 100mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X100ST is a double-acting JIS compact cylinder engineered for substantial linear thrust within a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, reaching a maximum push capacity of 801 kgf at 1.0 MPa. The integrated -S piston magnet enables position detection using AirTAC reed or electronic switches housed in the body's peripheral grooves.
This 100 mm bore unit features a 32 mm piston rod and a NPT3/8 port. Its C-clip and riveted body construction drastically reduces overall length compared to standard round-body cylinders. End-of-travel deceleration is handled by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorbers to prevent impact damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X100ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N extension force needed to eject dense plastic parts from injection molding machinery, utilizing the 100 mm stroke to clear the mold cavity completely.
Raises heavy industrial pallets within automated assembly lines, where the integrated magnet confirms upper and lower positions via electronic sensors for safe load handling.
Drives heavy-gauge material pushers into mechanical stamping presses, relying on the NBR bumper to absorb the kinetic energy of the 32 mm rod at rapid cycling speeds.
Selecting this model involves matching your thrust and spatial requirements. If 3927 N of push at 0.5 MPa exceeds your needs, the adjacent 80 mm bore provides 2513.2 N. Conversely, stepping up to the 125 mm bore yields 6135.9 N for heavier payloads. This ACQ100X100ST configuration specifies a 100 mm stroke, a female M20x2.5 rod-end thread, and the built-in magnet for switch mounting.
Remember that a standard double-acting compact cylinder drifts when air pressure is removed or the valve is centered, as the fixed bumper only decelerates the piston near stroke end and does not act as a brake. To maintain a fail-safe vertical load position without live pressure, you must incorporate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3524.8 N of pull force. At 0.7 MPa, the push force increases to 5497.8 N. The maximum push force is 801 kgf at the 1.0 MPa operating pressure limit, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which cannot be field-adjusted; high-speed applications may need external shock absorbers. Additionally, it does not hold position upon air loss, so a pilot-operated check valve or external rod lock is required for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.