
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X100T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 100mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X100T is a double-acting JIS compact cylinder engineered to deliver a substantial 3927 N push force at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduces axial footprint compared to conventional round-body units, making it highly effective for tight machinery spacing. The unit features a 32 mm piston rod and a NPT3/8 port.
This model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact, meaning it is not a field-adjustable air cushion. Operating between 0.15-1.0 MPa at speeds of 30-500 mm/s, it uses a female M20x2.5 rod-end thread. While the body includes magnetic-switch grooves, this specific configuration ships without a sensing magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X100T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives ejection pins on a 200-ton injection molding press, utilizing the full 100 mm stroke to safely clear deep mold cavities.
Pushes heavy-gauge steel coil strips into a progressive die stamping line, relying on 5497.8 N of extend force at 0.7 MPa.
Applies high clamping pressure to hold automotive door panels during robotic spot-welding and structural forming operations.
Selecting this 100 mm bore involves sizing against adjacent options: stepping down to the ACQ80 yields 2513.2 N push at 0.5 MPa, while no larger standard bore exists in this family. Keep in mind that a plain ACQ body does not hold its position if air pressure drops or the valve centers—the piston will drift, and the NBR bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding. To order, confirm the 100 mm stroke, NPT3/8 port, female M20x2.5 rod thread, and the absence of the -S magnet.
Quick checklist
This 100 mm bore cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, extending to 5497.8 N push at 0.7 MPa, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and speeds of 30-500 mm/s.
The end-stop damping uses a fixed NBR elastomer bumper, not an adjustable air cushion, so you should slow the approach or use external shock absorbers for high-energy loads. Additionally, while the body has sensor grooves, this model lacks the internal magnet; you must select an -S option variant to use AirTAC reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.