
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X10SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X10SBT is a double-acting JIS compact cylinder engineered for substantial force in a minimal axial footprint. It provides 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, extending to 5497.8 N at 0.7 MPa. The short C-clip and riveted body design significantly reduces overall length compared to round-body alternatives, saving valuable mounting depth in tight machinery layouts.
This specific configuration includes a built-in piston magnet for use with AirTAC reed or electronic switches, and a male M26x1.5 thread on the Ø32 mm piston rod for direct load coupling. Deceleration at the stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X10SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives heavy mold ejection plates out of thick injection molding machines where a short 10 mm stroke is sufficient but 3927 N of push force is mandatory.
Executes short, high-impact stamping and marking operations on heavy-gauge steel blanks, leveraging the 5497.8 N push force available at 0.7 MPa.
Actuates heavy-duty pneumatic chucks on CNC turning centers, using the male M26x1.5 rod thread to secure the raw bar material firmly during high-torque cutting.
For sizing context, stepping down to the 80 mm bore yields 2513.2 N of push force at 0.5 MPa, while moving up to the 125 mm big-bore variant provides 6135.9 N. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates near the end of travel. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
When ordering this model, confirm the 100 mm bore, 10 mm stroke, NPT3/8 port, the S magnet option for sensing, and the B male-thread rod end (M26x1.5).
Quick checklist
The ACQ100X10SBT generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa.
No, the ACQ100X10SBT uses a fixed NBR elastomer bumper at each end to absorb the end stop. It is not a field-adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.