
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X10ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X10ST is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a 32 mm piston rod and a NPT3/8 port. The short C-clip and riveted body design significantly reduces overall length compared to traditional round-body units, saving valuable machine depth.
This 100 mm bore variant includes a built-in piston magnet (the S option) compatible with AirTAC reed or electronic switches via the peripheral sensor grooves. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption or a slowed approach. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X10ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 3927 N push force to eject heavy plastic parts from injection molding machines within a tight machinery profile.
Executes short 10 mm high-force press strokes for stamping metal contacts and brackets in progressive die tooling.
Lifts loaded pallets in packaging lines, utilizing the 32 mm rod and fixed NBR bumper to absorb the shock of heavy end-stops.
When sizing this 100 mm bore unit, stepping down to an 80 mm bore yields 2513.2 N of push force at 0.5 MPa, while stepping up to a 125 mm bore provides 6135.9 N. This ACQ100X10ST configuration features a 10 mm stroke, a female rod-end thread (M20x2.5), and the integrated magnet. Ensure you specify the male B thread (M26x1.5) if your linkage demands it.
Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered; the rod will drift. For fail-safe position holding, an external rod lock or a pilot-operated check valve is required.
Quick checklist
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion, so high-energy applications may need an external shock absorber. The built-in magnet works with AirTAC reed or electronic switches fitted into the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.