
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X10T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 10mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X10T is a double-acting JIS compact cylinder engineered for substantial force in minimal axial space. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, peaking at 801 kgf maximum push at 1.0 MPa. The C-clip and riveted piston-to-rod assembly yields a very short body, saving valuable mounting depth where a conventional round-body actuator would not fit.
This specific model features a 10 mm stroke and a 32 mm piston rod with a female M20x2.5 thread. End-stop energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed approaches may require external shock absorption. The body includes magnetic-switch grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X10T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a short 10 mm knockout stroke inside tight mold platens, using its 3927 N push force to break heavy plastic parts free without consuming valuable machine depth.
Drives solid bearings or pins into housings on an assembly line, relying on the rigid 32 mm rod and fixed NBR bumper to absorb the sudden impact at the end of the brief stroke.
Positions thick steel blanks into a die set where axial length is restricted, leveraging the compact C-clip body design to fit within tight press guarding.
Selecting this 100 mm bore actuator involves balancing your force requirements with spatial limits. If 3927 N push at 0.5 MPa is excessive, stepping down to the 80 mm bore provides 2513.2 N, whereas moving up to the 125 mm big-bore variant yields 6135.9 N. Keep in mind that a plain ACQ cylinder will drift and cannot hold a load if air pressure drops or the valve is centered; a fail-safe hold requires an external rod lock or pilot-operated check valve.
When ordering, confirm the 100 mm bore, 10 mm stroke, NPT3/8 port, and the default female rod-end thread (M20x2.5). Because this unit lacks the S option, it does not include a sensor magnet for reed or electronic switches.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3524.8 N. At 0.7 MPa, the push force reaches 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which cannot be field adjusted. If your application runs at high speeds or involves significant moving mass, you should slow the approach speed or install an external shock absorber to prevent damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.