
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X15BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 15mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X15BT is a double-acting JIS compact cylinder engineered for high-force actuation within a minimal axial footprint. By utilizing a C-clip and riveted piston-to-rod assembly rather than a conventional long tie-rod format, this 100mm bore unit achieves a very short overall length. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, peaking at 801 kgf maximum push at 1.0 MPa.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct mechanical coupling to your tooling. The 32mm diameter rod is driven by air supplied through a NPT3/8 port. To manage end-stop impact, the body incorporates fixed NBR elastomer bumpers rather than adjustable air cushions, meaning external shock absorbers should be added for high-energy cycles. The body exterior features integrated magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X15BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 3927 N push force to eject heavy plastic parts from injection molding dies, where the short 15mm stroke and male M26x1.5 rod end mount directly to the ejector plate.
Indexes thick sheet metal workpieces into a stamping press, utilizing the compact body depth to fit within tight machine footprints while delivering reliable high-force indexing.
Transfers heavy bearing housings or gear blanks into a hydraulic press bed, benefiting from the 100mm bore capacity and fixed NBR bumpers to absorb the sudden load placement.
Selecting this 100mm bore model provides 3927 N of thrust at 0.5 MPa. If your application requires less force, stepping down to the 80mm bore yields 2513.2 N, whereas stepping up to the 125mm big-bore variant provides a substantial 6135.9 N. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the directional valve is centered; the rod will drift. For fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve. When ordering, confirm the 100mm bore, 15mm stroke, NPT3/8 port, male M26x1.5 rod thread, and the absence of a sensor magnet.
Quick checklist
This 100mm bore double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa pressure, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at each end to absorb shock, which cannot be field adjusted; for high-speed impacts, add external shock absorbers. Additionally, it does not hold its load if air is lost—the piston drifts, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.