
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X15SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 15mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X15SBT is a double-acting JIS compact single-rod cylinder engineered to deliver substantial force in a minimal axial footprint. It provides 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, generated by a 100 mm bore. The short C-clip and riveted body construction saves mounting depth compared to round-body units, making it highly effective for tight machine layouts.
This specific configuration includes a built-in piston magnet (S) for position sensing and a male-thread piston rod end (B, M26x1.5) for direct load coupling. The 32 mm diameter rod operates within a hard-anodized bore, and the body features magnetic-switch grooves around its exterior for mounting AirTAC reed or electronic solid-state switches. Deceleration is handled by fixed NBR elastomer bumpers at each end, not adjustable air cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X15SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Securing heavy injection mold halves within a short axial mounting envelope, utilizing the 3927 N push force and male M26x1.5 rod for direct fixture attachment.
Ejecting formed metal parts from stamping presses, where the 100 mm bore delivers high impact force and the NBR fixed bumpers absorb the end-stop energy.
Positioning heavy pallets or loads on packaging lines, using the integrated magnet with electronic switches to confirm stroke endpoints at up to 500 mm/s.
When sizing this 100 mm bore model, stepping down to an 80 mm bore yields 2513.2 N of push at 0.5 MPa, while stepping up to a 125 mm big-bore variant provides 6135.9 N. For the ACQ100X15SBT, confirm the 100 mm bore, 15 mm stroke, NPT3/8 port, male M26x1.5 rod thread, and the integrated magnet. Note that a plain ACQ cylinder does not hold its load if air pressure is lost or the valve is centred; the rod drifts, and the fixed bumper only decelerates near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required.
Quick checklist
The 100 mm bore generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. The port size is NPT3/8, fixed by the bore.
No, it uses fixed NBR elastomer bumpers at each end, which are not field-adjustable. For high-speed applications, add an external shock absorber. It also does not hold its load if air is lost; an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.