
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X15T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 15mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X15T is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a 32 mm piston rod coupled via a female M20x2.5 thread. The C-clip and riveted body design significantly reduces overall length compared to standard round-body units, saving valuable machine mounting depth.
This 100 mm bore model relies on fixed NBR elastomer bumpers at both ends to absorb end-stop energy rather than an adjustable air cushion. The body features integrated magnetic-switch grooves, though this specific SKU ships without the internal magnet. Operating at speeds of 30-500 mm/s via a NPT3/8 port, it is built for heavy-duty short-stroke actuation where space is constrained. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X15T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 3927 N push force to eject heavy stamped metal panels from a press die within a very short 15 mm stroke window.
Secures large injection molding tooling halves using high force in a compact footprint, saving valuable machine bed depth.
Lifts and indexes loaded pallets on a packaging line, utilizing the 32 mm rod to handle high dynamic loads without excessive axial overhang.
Selecting this 100 mm bore unit makes sense when your application requires its exact 3927 N push at 0.5 MPa. If you need slightly less force, the 80 mm bore provides 2513.2 N, while stepping up to the 125 mm bore yields 6135.9 N. Ensure you specify the 15 mm stroke, NPT3/8 porting, female M20x2.5 rod end, and confirm whether you need the -S magnet option for position sensing.
Because this is a double-acting cylinder, it will not hold its load if air pressure is lost or the directional valve is centered—the piston will drift. The fixed NBR bumper decelerates the rod near the stroke ends but does not function as a locking brake. For fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3524.8 N. At 0.7 MPa, the push force reaches 5497.8 N, with a maximum push capacity of 801 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb impact energy; it is not equipped with an adjustable air cushion. It does not hold position on air loss and will drift, so an external shock absorber or rod lock is required for high-energy stops or fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.