
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X20BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 20mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X20BT is a double-acting JIS compact cylinder engineered to deliver substantial thrust in tight axial envelopes. It generates 3927 N of push force at 0.5 MPa and 5497.8 N at 0.7 MPa. The integrated C-clip and riveted piston-to-rod design drastically reduce overall length compared to round-body alternatives, saving valuable machine footprint depth.
This specific configuration features a male-thread piston rod end (M26x1.5) for direct, secure load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion. The hard-anodized aluminum bore ensures durability, while the body retains magnetic-switch grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X20BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Ejects heavy formed metal panels from a 100-ton mechanical press, utilizing the male M26x1.5 thread for a rigid tool connection and the short 20mm stroke for rapid ejection.
Provides high-force clamping of chassis subframes during robotic spot welding, where the compact body depth prevents interference with adjacent welding guns.
Pushes heavy shrink-wrapped pallet loads onto a transfer chain line, relying on the 3927 N extension force to overcome sliding friction at high cycling rates.
When sizing your drive, consider the neighboring bores: the 80mm variant yields 2513.2 N push, while the 125mm version provides 6135.9 N at 0.5 MPa. This 100mm model hits a robust 3927 N, making it ideal for heavy pressing. Remember that a standard ACQ body will not hold a load if air pressure drops; the piston drifts and the fixed bumper only softens the end stop. For fail-safe positioning, integrate an external rod lock or a pilot-operated check valve. To order, confirm the 100mm bore, 20mm stroke, NPT3/8 port, male M26x1.5 rod thread, and no magnet.
Quick checklist
The ACQ100X20BT generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed is 30-500 mm/s, and temperature ranges from -20 to +70 C.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable air cushion. For high kinetic energy or fast cycling, you should slow the approach speed or mount an external shock absorber to protect the equipment.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.