
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X20SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 20mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X20SBT is a double-acting JIS compact cylinder engineered for substantial force in tight axial footprints. A C-clip and riveted piston-to-rod assembly shrinks the overall body length compared to conventional round-body units, yielding 3927 N of push force at 0.5 MPa from its 100 mm bore. Because this configuration includes the S and B options, it arrives with a built-in piston magnet and a male M26x1.5 threaded rod end for direct load coupling.
Deceleration relies on a fixed NBR elastomer bumper at each end stop, which is not a field-adjustable air cushion; for high kinetic energy cycles, consider slowing the approach or adding an external shock absorber. The hard-anodized inner wall minimizes wear, while the integrated magnet slot accommodates your choice of reed or electronic switch for position sensing. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X20SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives heavy ejector pins on plastic injection moulding machines where a short 20 mm stroke and massive push force are required to free dense parts.
Secures heavy steel plates in a hydraulic press fixture, using the male M26x1.5 rod end for a rigid, direct thread connection to the top tooling plate.
Crushes and squares warped wooden pallets at the infeed of high-speed packaging lines, relying on the compact body to fit within tight conveyor frame gaps.
When sizing this 100 mm bore actuator, evaluate your real thrust needs by looking at adjacent options. Stepping down to an 80 mm bore yields 2513.2 N push at 0.5 MPa, while stepping up to a 125 mm big-bore variant provides 6135.9 N push at 0.5 MPa. This 20 mm stroke operates well within the 100 mm maximum standard stroke limit for this family, with long-stroke variants available up to 300 mm.
Remember that a standard ACQ body does not hold its position if air pressure drops or the directional valve centres; the rod will drift, as the fixed bumper only decelerates near the end of travel and cannot act as a mechanical lock. For fail-safe load holding, specify an external rod lock or a pilot-operated check valve. To order this exact unit, confirm the 100 mm bore, 20 mm stroke, NPT3/8 port, male M26x1.5 rod thread, and the required magnetic piston.
Quick checklist
This double-acting 100 mm bore cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-500 mm/s.
It features a male M26x1.5 threaded piston rod end (the B option) for direct mounting. It does not use an adjustable air cushion; instead, fixed NBR elastomer bumpers absorb impact at the stroke ends. An external shock absorber should be added for high-speed loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.