
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X20T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 20mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X20T is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. It yields 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, peaking at 801 kgf under 1.0 MPa. The short C-clip and riveted piston-to-rod assembly significantly reduces overall length compared to round-body units, saving valuable machine depth.
This 100mm bore unit features a 32mm piston rod and a NPT3/8 port. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable cushion, meaning external shock absorbers should be added for high-energy impacts. The body includes sensor grooves for magnetic switches, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X20T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust push force to eject heavy plastic parts from injection molding machines where short stroke depth is required.
Drives large bearings into housings on automotive assembly lines, utilizing the 100mm bore for high-thrust pressing.
Actuates heavy diverter gates in high-speed packaging lines, fitting into compact machinery frames.
Selecting the ACQ100X20T provides 3927 N of thrust at 0.5 MPa. If your application requires less force, the 80mm bore variant offers 2513.2 N of push, or for heavier demands, the 125mm bore delivers 6135.9 N. Keep in mind a standard ACQ body will drift and lose its position if air pressure drops, as the fixed NBR bumper only decelerates the stroke end and does not function as a lock. For fail-safe holding, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 100mm bore, 20mm stroke, NPT3/8 port, female M20x2.5 rod end, and no magnet.
Quick checklist
The ACQ100X20T generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the stop, which is not an adjustable air cushion. The cylinder does not hold its load if air is lost; the piston will drift, so an external rod lock or check valve is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.