
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X25BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 25mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X25BT is a double-acting JIS compact cylinder engineered for substantial force in a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a short C-clip and riveted body design that significantly reduces mounting depth compared to round-body alternatives.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct mechanical coupling to your load. To absorb end-stop impact, the cylinder relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, and the hard-anodized bore operates at speeds between 30 and 500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X25BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Applies 5497.8 N of extend force at 0.7 MPa to secure heavy injection mold halves within tight machinery frames.
Drives short-stroke stamping dies for automotive body panels, leveraging the 32 mm male-thread rod for rigid tool coupling.
Presses large bearings into cast iron housings on heavy machinery assembly lines, using the compact body to save machine depth.
When sizing this 100 mm bore model, consider stepping down to the 80 mm bore if your application only requires 2513.2 N of push force at 0.5 MPa, or stepping up to the 125 mm bore for heavy-duty tasks needing 6135.9 N. Remember that a standard ACQ body does not inherently hold a load if air pressure is lost; the rod will drift and the fixed bumper only decelerates it near the stroke end. For fail-safe positioning, integrate an external rod lock or a pilot-operated check valve. To order this exact unit, confirm the 100 mm bore, 25 mm stroke, NPT3/8 porting, absence of a sensor magnet, and the male M26x1.5 rod thread.
Quick checklist
This 100 mm bore cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. The fluid port size is NPT3/8.
This model uses a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion; for high-speed operations you should add an external shock absorber. Additionally, this specific unit ships without the -S magnet, so while the body has sensor grooves, you cannot use AirTAC reed or electronic switches without modifying the piston.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.