
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X25SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 25mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X25SBT is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a robust 32 mm piston rod. The integrated C-clip and riveted piston-to-rod assembly significantly reduces overall length compared to standard round-body options.
This specific configuration includes an S option for a built-in piston magnet, enabling position detection via AirTAC reed or electronic switches housed in the body grooves. The B option provides a male M26x1.5 threaded rod end for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at both ends, which are not field-adjustable, meaning high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X25SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the high 3927 N push force required to eject dense plastic parts from injection molding tools, utilizing the short 25 mm stroke to fit within tight machinery bases.
Drives short-stroke stamping and marking presses where the male M26x1.5 rod end securely attaches to the tooling head for rigid, high-impact actuation.
Actuates heavy pallet lifting gates in packaging lines, relying on the built-in magnet to confirm lift positions via electronic switches for safe load handling.
Selecting this 100 mm bore model is appropriate when your application requires substantial thrust, such as the 3927 N push force generated at 0.5 MPa. If you need slightly less force, the 80 mm bore offers 2513.2 N of push at the same pressure, while stepping up is not available as this is the largest standard diameter before entering the 125 mm big-bore range (6135.9 N push). Ensure your setup can accommodate the NPT3/8 porting and the 32 mm rod diameter.
Keep in mind that a standard double-acting cylinder of this type will drift if air pressure is lost or the valve is centered, as the fixed bumpers only decelerate the piston near stroke end rather than locking it. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. When ordering, verify your needs for the 25 mm stroke, the S magnet option, and the B male M26x1.5 rod thread.
Quick checklist
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, the ACQ100X25SBT uses fixed NBR elastomer bumpers at the stroke ends, which are not adjustable air cushions; for high-energy impacts, slow the approach or add external shock absorbers. Additionally, it cannot hold a load if air is lost, so an external rod lock or pilot-operated check valve is needed for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.