
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X25T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 25mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X25T is a double-acting, single-rod JIS compact cylinder engineered for substantial actuation tasks, delivering 3927 N of push force at 0.5 MPa and up to 5497.8 N at 0.7 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to conventional round-body designs, saving valuable machine footprint depth. This 100mm bore variant features a robust 32mm piston rod and a NPT3/8 port.
This model relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion, meaning high-speed applications may require external shock absorption or a slowed approach. While this specific unit ships without a sensor magnet, the body retains integrated magnetic-switch grooves for seamless sensor integration when needed. The female-thread M20x2.5 rod end provides a solid coupling point, though side loading should be minimized to protect the compact rod assembly. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X25T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the heavy 3927 N push force required to eject dense plastic parts from large injection molding dies where a short 25mm stroke is ideal.
Acts as a compact actuator for positioning heavy sheet metal blanks into a hydraulic press, utilizing the 32mm rod to handle substantial mass without buckling.
Drives secondary clamping arms on large CNC lathes, using the fixed NBR bumper to soften the impact of rapid 30-500 mm/s actuation at the stroke limits.
Choosing this 100mm bore involves significant force scaling; stepping down to an 80mm bore yields 2513.2 N push at 0.5 MPa, while no larger standard ACQ bore exists, making this the maximum thrust option for the series. Remember that a standard ACQ cylinder does not inherently hold its position or load if air pressure is lost or the valve is centered—the piston will drift, and the fixed NBR bumper only decelerates it near the stroke end, so a fail-safe hold requires an external rod lock or pilot-operated check valve. When ordering, verify your requirements for the 100mm bore, 25mm stroke, NPT3/8 port, female M20x2.5 rod thread, and confirm whether a sensor magnet is needed for your control logic.
Quick checklist
The ACQ100X25T generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at 30-500 mm/s, uses a NPT3/8 port, and has a 32mm rod with an M20x2.5 female thread.
It uses a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion or a locking brake. For high-energy impacts, you should slow the approach or add an external shock absorber. If the application must hold a load without live pressure, an external rod lock or pilot-operated check valve is required, as the piston will drift upon air loss.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.