
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X30BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 30mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X30BT is a double-acting JIS compact cylinder engineered to deliver substantial thrust within a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, peaking at 801 kgf maximum push at 1.0 MPa. The riveted and C-clip secured body design significantly reduces overall length compared to standard round-body alternatives, making it highly effective for tight machine layouts.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct mechanical coupling to your tooling. The 32 mm rod operates within a hard-anodized bore, while a fixed NBR elastomer bumper at each end absorbs end-stop impact. Note that this bumper is not field-adjustable; for high kinetic energy loads, an external shock absorber is recommended to prevent damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X30BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N push force required to eject dense plastic parts from heavy injection molding machinery, utilizing the short body to fit within tight mold platens.
Drives bearings or bushings into automotive housings, leveraging the male M26x1.5 rod thread for secure tooling attachment and the 30 mm stroke for rapid cycling.
Flattens and squares heavy corrugated pallets prior to stretch wrapping, relying on the 100 mm bore's high thrust to overcome friction without excessive axial depth.
When sizing this 100 mm bore actuator, compare its 3927 N push at 0.5 MPa against adjacent options. Stepping down to the 80 mm bore yields 2513.2 N, while moving up to the 125 mm big-bore variant provides 6135.9 N. Ensure the 30 mm stroke matches your required travel, and verify your pneumatic plumbing can supply the NPT3/8 port. This model includes the male M26x1.5 rod thread but ships without a sensor magnet.
A standard ACQ body does not inherently hold a load if air pressure drops or the directional valve is centered; the piston will drift, and the fixed bumper only decelerates the rod near the stroke end. If your application demands fail-safe position holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 100 mm bore cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, and 5497.8 N push at 0.7 MPa, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses a fixed NBR elastomer bumper at each end to absorb impact rather than an adjustable air cushion. Additionally, while the body features grooves for AirTAC reed or electronic switches, this specific model ships without the internal sensor magnet, so position detection is not supported without modification.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.