
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X30SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 30mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X30SBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. By utilizing a C-clip and riveted piston-to-rod assembly, the overall body length is drastically reduced compared to conventional round-body units, saving valuable machine depth. This 100mm bore model generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, making it a robust choice for heavy-duty actuation.
Equipped with a built-in piston magnet (-S), the body features peripheral grooves for mounting AirTAC magnetic reed or electronic switches for precise position detection. The -B option designates a male M26x1.5 threaded rod end, providing a direct, solid coupling to your tooling. Deceleration at stroke ends is handled by fixed NBR elastomer bumpers rather than adjustable air cushions, so for high-energy cycles, incorporating an external shock absorber is advised. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X30SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 3927 N push force at 0.5 MPa to secure heavy injection mold halves or lock large mechanical platens during processing.
Utilizes the male M26x1.5 rod end to directly push large finished metal stampings or cast parts out of a heavy-duty hydraulic press bed.
Acts as a high-force physical stop barrier on heavy-duty roller conveyors to halt loaded pallets weighing up to several hundred kilograms.
When sizing this 100mm bore unit, evaluate your force requirements carefully. Stepping down to an 80mm bore yields 2513.2 N of push at 0.5 MPa, while this ACQ100X30SBT provides 3927 N at the same pressure. If your application demands maximum thrust, 100mm is the largest standard bore before moving into the 125mm big-bore tier (6135.9 N push). Keep in mind that a standard ACQ body does not hold a load if air pressure is lost or the directional valve is centered; the rod will drift, and the fixed bumper only decelerates the piston near the end of travel. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
To finalize your order for this specific configuration, confirm these essentials: 100mm bore, 30mm stroke, NPT3/8 port thread, built-in magnet (-S), and the male M26x1.5 rod end thread (-B). The standard maximum stroke for this bore is 100mm, and the operational speed range spans 30-500 mm/s.
Quick checklist
The ACQ100X30SBT delivers 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. The port size is NPT3/8, fixed by the 100mm bore.
Cushioning is provided by fixed NBR elastomer bumpers at each end, which are not field-adjustable; for high-speed impacts, use an external shock absorber. Additionally, this cylinder cannot hold a load on air loss or valve centering—the piston will drift, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.