
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X30ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 30mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X30ST is a double-acting, single-rod JIS compact cylinder engineered for heavy-duty space optimization. It yields 3927 N of push force and 3524.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body construction drastically reduces axial mounting depth compared to standard round-body units, saving valuable machine footprint.
This 100mm bore variant incorporates an NBR elastomer bumper at each end to decelerate the stroke end, rather than an adjustable air cushion. Equipped with the -S magnet option, the body features integrated grooves for AirTAC reed or electronic switches. The 32mm piston rod uses a standard M20x2.5 female thread and operates at 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X30ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 3927 N of extend force at 0.5 MPa to secure heavy injection mold halves within tight machinery envelopes.
Drives a 30mm stroke pressing head to seal large packaging crates, using the fixed NBR bumper to absorb the 801 kgf max impact.
Ejects heavy stamped metal panels from progressive die sets, utilizing the 32mm rod and integrated sensor magnet for position verification.
When sizing this 100mm bore model, consider the 80mm bore alternative which provides 2513.2 N of push at 0.5 MPa, or step up to the 125mm big-bore variant offering 6135.9 N of push at 0.5 MPa. A plain ACQ cylinder does not hold its load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates it near stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order this specific unit, confirm the 100mm bore, 30mm stroke, NPT3/8 port, female M20x2.5 rod thread, and the built-in magnet.
Quick checklist
This double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, the ACQ100X30ST uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not a field-adjustable air cushion. For high-speed or high-energy loads, add an external shock absorber or slow the approach velocity.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.