verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T

The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X30T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 30mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ100 mm
  • Stroke30 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×2.5 (F) / M26×1.5 (B)
  • ConfigurationStandard compact
$137.85 $145.35Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ100 stroke, mounting and version on one page All ACQ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T

The AirTAC ACQ100X30T is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It produces 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, scaling up to 5497.8 N push at 0.7 MPa. The C-clip and riveted piston-to-rod assembly keeps the overall body exceptionally short compared to traditional round-body units, solving depth constraints in heavy machinery.

This 100 mm bore model relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy rather than an adjustable air cushion. The bore inner wall is hard-anodized for durability, and the 32 mm piston rod terminates in a female M20x2.5 thread. While the body features magnetic-switch grooves, this specific SKU ships without a sensor magnet, operating via a NPT3/8 port. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ100X30T
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ100 mm
Stroke30 mm
Acting typeDouble acting
Port sizePT3/8
Rod end threadM20×2.5 female / M26×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3525 N
0.7 MPa5498 N—
Max (@1.0 MPa)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T

ACQJIS compact (thin) double-acting cylinder series.
100Bore size in mm.
×30Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T Is Used

factory

Injection Mold Ejection

Provides robust 3927 N push force at 0.5 MPa to eject dense plastic parts from injection molding machines, utilizing the short C-clip body to fit within tight mold clamp footprints.

straighten

Heavy Press Forming

Applies up to 5497.8 N of extend force at 0.7 MPa for light metal stamping and press-forming operations where a compact 30 mm stroke is sufficient to form or seat components.

vertical_align_center

Pallet Lift Positioning

Handles heavy pallet lifting and lowering tasks in automated packaging lines, relying on the 32 mm rod to resist deflection while moving substantial loads through the 30 mm travel.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T the Right Cylinder?

Selecting this 100 mm bore involves balancing force and spatial limits; it yields 3927 N push at 0.5 MPa. If you need slightly less power, stepping down to the 80 mm bore provides 2513.2 N push, while moving up to the 125 mm big-bore variant offers 6135.9 N push. Keep in mind that a plain compact cylinder like this drifts when air pressure is lost or the valve is centered, as the fixed NBR bumper only decelerates the piston near stroke end rather than locking it. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.

When requesting a quote, verify the essentials: 100 mm bore, 30 mm stroke, NPT3/8 port, female M20x2.5 rod thread, and no sensor magnet. Because the bumper is fixed and not field-adjustable, high-speed applications should incorporate an external shock absorber or slow the approach velocity.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T FAQ

The ACQ100X30T generates 3927 N push and 3524.8 N pull at 0.5 MPa, and 5497.8 N push at 0.7 MPa. The maximum push force is 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.

No, it uses fixed NBR elastomer bumpers at both ends rather than an adjustable air cushion, so high-energy stops may require external shock absorbers. Additionally, while the body has grooves for magnetic switches, this specific model ships without the internal magnet, meaning reed or electronic switches will not function unless a magnet is added.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ100X30T

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ100X30T and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.