
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X35BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 35mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X35BT is a double-acting JIS compact cylinder engineered to deliver substantial force within a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a hard-anodized 100 mm bore. This short C-clip and riveted body design saves mounting depth compared to standard round-body alternatives, making it ideal for heavy-duty machinery where space is restricted.
Equipped with a male M26x1.5 threaded piston rod end, this unit couples directly to your load with a robust 32 mm rod. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy impacts. The body retains magnetic-switch grooves, but this specific configuration ships without a sensor magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X35BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 3927 N push force to eject heavy formed metal panels from stamping dies, utilizing the short body to fit within tight press crowns.
Secures large injection molding tooling halves via the male M26x1.5 rod end, handling high clamping loads without consuming excessive machine depth.
Acts as a heavy-duty mechanical stop in automated palletizing lines, absorbing end-of-stroke impacts with its fixed NBR bumper while halting heavy loads.
Selecting this 100 mm bore involves balancing your force requirements against spatial limits. If you need slightly less output, the 80 mm bore offers 2513.2 N push at 0.5 MPa; stepping up is not possible as this is the largest standard diameter before entering the big-bore tier. Keep in mind that a plain compact cylinder like this drifts when air pressure is lost or the valve is centered, as the fixed NBR bumper only decelerates the piston near the end of travel and does not function as a locking brake.
When ordering, confirm the 100 mm bore, 35 mm stroke, NPT3/8 port, and the male M26x1.5 rod thread. Because this model lacks the S option, it does not include a magnet for position detection. Operating speed spans 30-500 mm/s, and maximum pressure is 1.0 MPa.
Quick checklist
This double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, speeds of 30-500 mm/s, and temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at both ends rather than field-adjustable air cushions, so you should slow the approach or add external shocks for high energy. Additionally, while the body has sensor grooves, this specific SKU ships without the internal magnet required for reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.