verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST

The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X35ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 35mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ100 mm
  • Stroke35 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×2.5 (F) / M26×1.5 (B)
  • ConfigurationStandard compact
$159.37 $166.87Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ100 stroke, mounting and version on one page All ACQ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST

The AirTAC ACQ100X35ST is a double-acting, single-rod JIS compact cylinder engineered for heavy-duty performance within a minimal axial footprint. Utilizing a short C-clip and riveted piston-to-rod assembly, this thin-body design significantly reduces mounting depth compared to conventional round-body units. At 100 mm bore, it generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, making it suitable for high-demand industrial tasks.

This specific configuration includes a built-in piston magnet (-S) for position detection via AirTAC reed or electronic solid-state switches seated in the body grooves. The 32 mm piston rod features a standard female M20x2.5 end thread for secure load coupling. Deceleration is handled by fixed NBR elastomer bumpers at both stroke ends; because this is not an adjustable air cushion, operators should utilize external shock absorbers or throttle the approach speed for high-energy loads. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ100X35ST
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ100 mm
Stroke35 mm
Acting typeDouble acting
Port sizePT3/8
Rod end threadM20×2.5 female / M26×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3525 N
0.7 MPa5498 N—
Max (@1.0 MPa)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST

ACQJIS compact (thin) double-acting cylinder series.
100Bore size in mm.
×35Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST Is Used

factory

Automotive Body Welding

Provides high clamping pressure on robotic welding fixtures, using its 3927 N push force to hold heavy steel panels securely in place during spot welding operations.

build

Injection Mold Extraction

Acts as a robust ejection cylinder on large plastic injection molding machines, pushing heavy molded parts out of the tool cavity with reliable force.

straighten

Heavy Press Ejection

Drives the knockout mechanism in mechanical power presses, utilizing the 35 mm stroke to eject thick metal blanks rapidly from the lower die.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST the Right Cylinder?

When sizing your pneumatic setup, consider stepping down to an 80 mm bore for 2513.2 N push at 0.5 MPa, or stepping up to a 125 mm bore for 6135.9 N push at 0.5 MPa to match your exact force requirements. Keep in mind that a standard ACQ body will not hold a load if air pressure drops or the valve is centered—the piston will drift, as the fixed NBR bumper only decelerates the stroke near its end points and does not act as a mechanical lock. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order this model, confirm the 100 mm bore, 35 mm stroke, NPT3/8 port, female M20x2.5 rod thread, and the integrated magnet option.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST FAQ

The ACQ100X35ST generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 5497.8 N. The maximum allowable push force is 801 kgf at 1.0 MPa operating pressure.

No, it uses fixed NBR elastomer bumpers at each end to absorb end-stop impact rather than a field-adjustable air cushion. Additionally, it does not hold its load if air is lost; the piston drifts, requiring an external rod lock or pilot-operated check valve for fail-safe holding.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ100X35ST

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ100X35ST and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.