
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X40BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 40mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X40BT is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, extending to 5497.8 N at 0.7 MPa. The integrated C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body alternatives, saving valuable machine depth where space is tight.
This specific configuration features a 32 mm piston rod with a male M26x1.5 thread end, providing a robust, direct coupling to your load. Instead of an adjustable air cushion, it relies on fixed NBR elastomer bumpers at both ends to absorb end-stop impact. For high-speed or high-energy cycles, adding an external shock absorber is recommended. The body includes standard magnetic-switch grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X40BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides heavy-duty holding force for securing injection mold halves within compact press platens, utilizing the male M26x1.5 thread for direct mold mounting.
Generates 5497.8 N of thrust at 0.7 MPa to lock large aerospace or automotive castings firmly against CNC machining locators during high-speed milling.
Ejects completed pallet loads from stretch wrappers in tight conveyor zones where the short JIS compact body prevents interference with adjacent guarding.
When sizing this 100 mm bore model, consider stepping down to the 80 mm bore if your layout permits, which yields 2513.2 N of push at 0.5 MPa. If your application demands even more power, the 125 mm big-bore variant provides 6135.9 N of push at 0.5 MPa. Ensure you specify the 40 mm stroke, NPT3/8 port size, and the male M26x1.5 rod thread when ordering.
Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the rod will drift. If your mechanism requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve. The fixed NBR bumper only decelerates the piston near the stroke end and does not act as a mechanical brake.
Quick checklist
This 100 mm bore double-acting cylinder delivers 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa at speeds of 30-500 mm/s.
It features a male M26x1.5 threaded piston rod for direct load coupling. Instead of an adjustable air cushion, it uses fixed NBR elastomer bumpers at each end to absorb impact; you should slow the approach or use external shock absorbers for high-energy loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.