
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X40ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 40mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X40ST is a double-acting, single-rod JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. By utilizing a C-clip and riveted piston-to-rod joint rather than a conventional long tie-rod assembly, this thin-body design significantly reduces overall mounting depth. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, driven through a 32 mm piston rod.
Equipped with an integrated magnet (-S option), the body features peripheral grooves ready to accept AirTAC reed or electronic solid-state switches for position sensing. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require external shock absorption. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X40ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N extension force needed to positively eject dense plastic automotive bumpers from large injection molding tools.
Pushes thick-gauge metal blanks into a mechanical stamping press, utilizing the 40 mm stroke and 32 mm rod to handle high side-load resistance.
Folds and secures heavy corrugated cardboard flaps on automated end-of-line palletizers where a compact 100 mm bore footprint is required.
When sizing your pneumatic drive, evaluate the force step directly: the smaller Ø80 bore provides 2513.2 N push at 0.5 MPa, whereas this Ø100 unit yields 3927 N. If your application requires even greater thrust, the larger Ø125 bore offers 6135.9 N at the same pressure. Remember that a plain ACQ cylinder will not hold a vertical load if air pressure drops or the directional valve is centered—the piston will drift, as the fixed NBR bumper only decelerates the stroke near its end, not lock it. For fail-safe positioning, incorporate an external rod lock or a pilot-operated check valve. To order this exact unit, confirm the 100 mm bore, 40 mm stroke, NPT3/8 port, female M20x2.5 rod end, and the integrated magnet for sensor tracking.
Quick checklist
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, with a functional speed range of 30-500 mm/s.
No, the ACQ100X40ST uses a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. For high kinetic energy loads or fast cycle speeds, you should add an external shock absorber or throttle the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.