
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X40T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 40mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X40T is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in a fraction of the axial depth required by a conventional round-body unit. It produces 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a 32 mm piston rod and a NPT3/8 port. The abbreviated C-clip and riveted body architecture directly reduces machine footprint where end-to-end space is highly restricted.
This 100 mm bore variant incorporates a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than relying on an adjustable air cushion. Because this specific model lacks the optional -S magnet, it cannot host magnetic switches despite retaining the sensor grooves. The default female rod-end thread is M20x2.5, providing a robust connection point for heavy payloads. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X40T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Kicks heavy stamped metal panels out of a 400-ton press bed, using the 3927 N push to overcome die friction before the next sheet loads.
Retracts a heavy mold core during the plastic injection cycle, fitting into the narrow mold base where a standard cylinder would exceed the machine platen limits.
Folds heavy cardboard flaps on bulk chemical pallets, relying on the 3524.8 N pull force to tension thick packaging tape securely.
Selecting this 100 mm bore involves sizing against adjacent options: stepping down to an 80 mm bore yields 2513.2 N push at 0.5 MPa, while no larger standard ACQ body exists, so for forces beyond this unit's 3927 N output, you must explore the big-bore 125 mm variant (6135.9 N). Keep in mind a plain ACQ cylinder will drift and lose its position if air pressure drops or the valve centers—the fixed NBR bumper only decelerates the rod near stroke end and does not function as a lock, so add an external rod lock for fail-safe load holding.
To order, confirm the essentials: 100 mm bore, 40 mm stroke, NPT3/8 port, female M20x2.5 rod thread, and no magnet. Operating speed spans 30-500 mm/s, making it suitable for fast cycling if external shock absorbers manage the high kinetic energy.
Quick checklist
At 0.5 MPa, the 100 mm bore provides 3927 N push and 3524.8 N pull. At 0.7 MPa, push increases to 5497.8 N, with a maximum push of 801 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at the stroke ends to absorb impact, not an adjustable air cushion. It also does not lock the load; if air is lost, the rod drifts, so an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.