
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X45B is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 45mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X45B is a double-acting JIS compact cylinder engineered for substantial thrust, delivering 3927 N of push force and 3524.8 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to conventional round-body units, saving valuable machine footprint in tight assemblies.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct load coupling, alongside a PT3/8 port and a 32 mm rod diameter. The internal bore is hard-anodized, and while it lacks a sensor magnet, the body retains external magnetic-switch grooves. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable cushions.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X45B |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N extension force needed to eject dense plastic parts from injection molding dies where axial depth is highly restricted.
Drives a 45 mm short-stroke stamping or forming operation, utilizing the male M26x1.5 rod end for a rigid, direct coupling to the upper tooling.
Clamps heavy chassis components securely in robotic welding cells, taking advantage of the 5497.8 N push force available at 0.7 MPa.
When sizing this 100 mm bore model, stepping down to an 80 mm bore yields 2513.2 N of push force at 0.5 MPa, while stepping up to a 125 mm big-bore variant provides 6135.9 N. To finalize your ACQ100X45B order, confirm the 100 mm bore, 45 mm stroke, PT3/8 port, male M26x1.5 rod thread, and no magnet. Remember that a plain compact cylinder drifts when air is lost or the valve is centered; if your application requires fail-safe position holding, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every ACQ100 order code with its price on one page at https://airtacdistr.com/products/airtac-acq100-compact-air-cylinder
Quick checklist
This double-acting single-rod cylinder generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at 30-500 mm/s, accepts a PT3/8 port, and has a maximum standard stroke of 100 mm for this 100 mm bore size.
It uses fixed NBR elastomer bumpers at each end to absorb shock, which are not field-adjustable; for high kinetic energy loads, slow the approach or add an external shock absorber. Additionally, it does not hold its load if air pressure is lost or the valve is centered, requiring an external rod lock for fail-safe holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.