
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X45SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 45mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X45SBT is a JIS compact double-acting single-rod cylinder engineered to deliver substantial force in a minimal axial footprint. By utilizing a C-clip and riveted piston-to-rod connection, the short body saves mounting depth compared to round-body alternatives. This specific 100mm bore configuration generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, making it suitable for heavy-duty positioning tasks.
This unit includes a built-in magnet (-S) for position sensing via AirTAC reed or electronic switches fitted into the body grooves. The -B option designates a male-thread piston rod end (M26x1.5) for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at each end, which are not adjustable, so high-speed applications may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X45SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust 3927 N push force to eject dense plastic components from injection molding dies, utilizing the male M26x1.5 thread for secure tool mounting.
Secures heavy cast iron engine blocks during CNC machining operations, where the compact body minimizes interference with the cutting tool path.
Handles lateral diversion of loaded heavy-duty pallets on packaging lines, relying on the magnetic switches for precise 45mm stroke positioning.
When sizing your actuator, consider stepping down to the 80mm bore for 2513.2 N push at 0.5 MPa, or stepping up to the 125mm bore for 6135.9 N push at 0.5 MPa. The 100mm bore provides a maximum push of 801 kgf at 1.0 MPa, operating at 30-500 mm/s. Keep in mind that a plain ACQ cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift and the fixed bumper only decelerates near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
To order this exact configuration, confirm the 100mm bore, 45mm stroke, NPT3/8 port, S magnet for sensing, and B male-thread rod end (M26x1.5).
Quick checklist
This 100mm bore double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It uses a NPT3/8 port, a 32mm rod, and operates at speeds of 30-500 mm/s.
It uses fixed NBR elastomer bumpers at each end, which are not adjustable air cushions, so external shock absorbers may be needed for high-energy loads. The rod features a male M26x1.5 thread (-B option) for direct coupling, and the -S magnet allows tracking by AirTAC reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.