
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X45T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 45mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X45T is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial footprint. By utilizing a short C-clip and riveted piston-to-rod body design, it saves mounting depth compared to conventional round-body units. At 0.5 MPa, this 100mm bore generates 3927 N of push force and 3524.8 N of pull force, scaling to 5497.8 N push at 0.7 MPa.
This specific configuration features a 32mm piston rod with a female M20x2.5 thread end and a NPT3/8 port. Deceleration is handled by a fixed NBR elastomer bumper at each end stop. Because it lacks an adjustable air cushion, high-energy cycles may require an external shock absorber to prevent wear. The body includes grooves for magnetic switches, but this model ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X45T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the heavy 3927 N push force needed to eject dense plastic automotive interior panels from large injection molding tools.
Drives a 45mm stroke to seat robust industrial bearings into heavy-duty gearbox housings on an automated machining line.
Flattens and squares bulky corrugated cardboard sheet stacks on high-throughput end-of-line palletizing equipment.
Selecting this 100mm bore provides a maximum push capacity of 801 kgf at 1.0 MPa. If you need slightly less force, the next bore down is the 80mm option, yielding 2513.2 N push at 0.5 MPa; stepping up to the 125mm big-bore variant increases output to 6135.9 N push at 0.5 MPa. Keep in mind that a plain ACQ body does not hold its load if air pressure drops or the valve is centered—the rod will drift, and the fixed bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding. When ordering, confirm the 45mm stroke, NPT3/8 port, female M20x2.5 rod thread, and the absence of the sensor magnet.
Quick checklist
This double-acting cylinder delivers 3927 N push and 3524.8 N pull at 0.5 MPa, and 5497.8 N push at 0.7 MPa. The maximum push force is 801 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s within a temperature range of -20 to +70 C.
It uses a fixed NBR elastomer bumper at each end to absorb the stop, which is not an adjustable air cushion. For high-speed cycles, you may need to slow the approach or add an external shock absorber. Additionally, it does not hold its load on air loss; the piston drifts, so a separate external rod lock is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.