
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X50BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X50BT is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in a minimal axial footprint. It provides 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a hard-anodized 100 mm bore to handle heavy-duty motion control tasks efficiently.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct mechanical coupling to your tooling. The riveted, C-clip body construction significantly reduces overall length compared to standard round-body units, while the fixed NBR elastomer bumpers absorb end-of-stroke impacts without requiring adjustment. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X50BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the ejector pins on a mid-tonnage injection molding machine, using its 3927 N extend force to positively strip finished plastic parts from the mold cavity.
Pushes heavy billet trays into the heating chamber of a hydraulic press, where the short compact body depth prevents interference with the press frame enclosure.
Actuates the knockout mechanism in a mechanical stamping press, relying on the male M26x1.5 rod thread to securely attach the heavy-duty stripper plate.
When sizing your pneumatic drive, note that stepping down to an 80 mm bore yields 2513.2 N of push at 0.5 MPa, whereas moving up to a 125 mm big-bore variant provides 6135.9 N. This 100 mm model strikes a strong balance for machinery requiring roughly 400 kgf of extend force over a 50 mm travel distance.
Keep in mind that a standard ACQ body does not lock the piston in place upon air loss or valve centering; the rod will drift, and the fixed bumper only decelerates it near the stroke end. If your process demands fail-safe position holding, you must integrate an external rod lock or a pilot-operated check valve. To finalize your order, confirm the 100 mm bore, 50 mm stroke, NPT3/8 port, male M26x1.5 rod thread, and the absence of a sensor magnet.
Quick checklist
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
It uses fixed NBR elastomer bumpers at both ends to absorb shock, which are not field-adjustable and act only as decelerators, not brakes. If your cycle speeds are high, add external shock absorbers; additionally, because the piston drifts when air is lost, an external rod lock is required for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.