
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X50SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X50SBT is a double-acting JIS compact cylinder engineered for substantial thrust within a minimal axial envelope. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, providing robust actuation where a traditional round-body unit would demand excessive mounting depth. The riveted piston-to-rod assembly and C-clip body construction keep the overall length exceptionally short.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B). The M26x1.5 male thread couples directly to your tooling, while the integrated magnet engages AirTAC reed or electronic switches housed in the body's peripheral grooves. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X50SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Ejects heavy formed metal panels from a hydraulic stamping press, utilizing the 5497.8 N extend force at 0.7 MPa to reliably overcome die friction and strip the part.
Actuates a large core block inside a plastic injection mold, where the short C-clip body saves critical axial space inside the mold base and the male M26x1.5 thread secures the tooling.
Raises a loaded pallet lift gate on a packaging conveyor, requiring the 32 mm rod diameter to handle the heavy dynamic load and the NBR bumper to soften the end-of-stroke impact.
Selecting this 100 mm bore model makes sense when your application requires substantial thrust, specifically 3927 N push at 0.5 MPa. If you need slightly less force, the 80 mm bore offers 2513.2 N of push at the same pressure. Stepping up is generally unnecessary for standard compact duties, as this is the largest standard frame before entering the big-bore 125 mm tier (6135.9 N push). Keep in mind that a plain ACQ cylinder will not hold a load vertically if air pressure drops or the valve is centered; the rod drifts until the bumper strikes the end cap. For fail-safe positioning, incorporate an external rod lock or a pilot-operated check valve. To order, confirm the 100 mm bore, 50 mm stroke, NPT3/8 port, male M26x1.5 rod thread, and the required magnetic switch.
Quick checklist
The ACQ100X50SBT generates a push force of 3927 N and a pull force of 3524.8 N at 0.5 MPa. At 0.7 MPa, the push force increases to 5497.8 N, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not field-adjustable; for high kinetic energy loads, you should add an external shock absorber. It does include a built-in magnet (-S) for use with AirTAC reed or electronic switches, and the rod end features a male M26x1.5 thread (-B) for direct mounting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.