
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X50ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X50ST is a double-acting JIS compact cylinder engineered to deliver substantial thrust in a minimal axial footprint. It provides 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a hard-anodized 100mm bore and a 32mm piston rod. The integrated C-clip and riveted piston-to-rod connection significantly reduce overall length compared to round-body alternatives, saving valuable machine base depth.
This unit includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches seated in the body grooves. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be specified for high-energy loads. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X50ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 3927 N push force required to eject heavy plastic automotive interior panels from large injection molding presses.
Knocks stamped steel blanks out of progressive die tooling, utilizing the 50mm stroke to clear the die bed rapidly.
Actuates large folding arms on automated palletizers to square and compress heavy corrugated cartons prior to stretch wrapping.
When sizing this 100mm bore model, consider stepping down to the ACQ80, which yields 2513.2 N of push force at 0.5 MPa for lighter duties, or stepping up to the ACQ125, which generates 6135.9 N at 0.5 MPa for heavier tooling demands. This 50mm stroke falls well within the 100mm maximum standard stroke limit for this bore, though longer requirements up to 300mm are available as a made-to-order long-stroke variant.
Remember that a standard double-acting compact cylinder does not hold its position if air pressure drops or the valve centers; the rod will drift and the fixed bumper only decelerates near the end of travel. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 100mm bore, 50mm stroke, NPT3/8 port, built-in magnet (S), and female M20x2.5 rod thread.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3524.8 N. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
No, the ACQ100X50ST uses a fixed NBR elastomer bumper at each end rather than a field-adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber to prevent end-stop damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.