
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X5B is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 5mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X5B is a double-acting JIS compact cylinder engineered for substantial force delivery within a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, achieving up to 801 kgf maximum push at 1.0 MPa. The C-clip and riveted body design significantly reduces overall length compared to standard round-body units, making it highly effective for tight machine layouts.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct, secure load coupling, alongside a robust Ø32 mm piston rod. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning external shock absorbers should be considered for high-energy cycles. Although this model ships without a sensor magnet, the body retains integrated switch grooves for future sensing upgrades.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X5B |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a heavy-duty staking head in automotive component assembly, using the 3927 N push force to deform rivets cleanly within a tight 5 mm travel.
Ejects dense metal castings from a machining fixture, utilizing the compact C-clip body to fit within the constrained Z-axis of a multi-spindle lathe.
Applies localized seating pressure to press bushings into engine blocks, relying on the rigid Ø32 mm male-threaded rod to maintain tooling alignment.
Selecting this 100 mm bore model is appropriate when your application requires substantial thrust, such as 5497.8 N at 0.7 MPa, within a very short 5 mm stroke. If you need slightly less force, the 80 mm bore offers 2513.2 N push at 0.5 MPa; stepping up is not possible as this is the largest standard bore before entering the 125 mm big-bore tier (6135.9 N push at 0.5 MPa). Keep in mind that a plain double-acting cylinder drifts when air pressure is lost or the valve is centered, so an external rod lock or pilot-operated check valve is necessary for fail-safe load holding. Ensure your order specifies the PT3/8 port, the male M26x1.5 rod thread, and the absence of a magnet.
AirtacDistr lists every ACQ100 order code with its price on one page at https://airtacdistr.com/products/airtac-acq100-compact-air-cylinder
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3524.8 N of pull force. At 0.7 MPa, the push force increases to 5497.8 N, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not a field-adjustable air cushion; you should slow the approach or add external shock absorbers for high-energy loads. Additionally, while the body features magnetic-switch grooves, this specific model ships without the internal magnet, so position sensing is not ready out of the box.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.