
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X5SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 5mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X5SBT is a double-acting, single-rod JIS compact cylinder engineered for immense thrust in tight axial envelopes. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a hard-anodized 100 mm bore. The short C-clip and riveted piston-to-rod assembly drastically reduces overall length compared to round-body units, saving valuable machine footprint.
This specific configuration includes a built-in piston magnet (-S) for use with AirTAC reed or electronic switches via grooves around the body, and a male-thread piston rod end (-B) sized at M26x1.5 for direct load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end; it is not an adjustable air cushion, so external shock absorbers should be added for high-energy stops. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X5SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides a short 5 mm high-force punch to seat and lock heavy injection mold halves, delivering 3927 N of extend force at 0.5 MPa within a tight tooling envelope.
Uses the male M26x1.5 rod end to securely attach an ejector pin, rapidly pushing formed metal components out of a stamping die using up to 801 kgf of max thrust.
Secures large steel weldments in machining fixtures, where the 100 mm bore and fixed NBR bumper absorb the sudden 5 mm end-stop impact without requiring long stroke lengths.
Selecting this 100 mm bore with a 5 mm stroke yields massive force in a minimal travel distance. If you are sizing your system, stepping down to an 80 mm bore yields 2513.2 N push at 0.5 MPa, while this ACQ100X5SBT provides 3927 N. As the largest standard bore in the main range, there is no larger standard step up without moving to the 125 mm big-bore variant (6135.9 N push). Keep in mind a plain compact cylinder drifts when air is removed or a valve is centered, as the fixed bumper only decelerates near stroke end and does not lock the load; utilize an external rod lock or pilot-operated check valve for fail-safe holding. Confirm your ordering essentials: 100 mm bore, 5 mm stroke, NPT3/8 port, -S magnet, and male M26x1.5 rod thread.
Quick checklist
This 100 mm bore double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates at 30-500 mm/s, accepts NPT3/8 ports, and has a 32 mm rod diameter.
No. The -S indicates a built-in magnet for AirTAC reed or electronic switches, and -B denotes the male M26x1.5 piston rod thread. End-of-stroke energy is absorbed by a fixed NBR elastomer bumper, not a field-adjustable air cushion. For high-speed 5 mm impacts, add external shock absorption.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.