
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X60B is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X60B is a double-acting, single-rod JIS compact cylinder engineered to deliver substantial thrust in a minimal axial footprint. By utilizing a C-clip and riveted piston-to-rod joint rather than a lengthy tie-rod assembly, this unit achieves a notably short overall length, conserving machine mounting depth where a conventional round-body actuator would not fit. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa.
This specific configuration includes a male-thread piston rod end (M26x1.5) for direct, secure coupling to tooling. The Ø32 mm rod is driven by a PT3/8 ported air supply. Instead of an adjustable air cushion, the bore ends feature fixed NBR elastomer bumpers that absorb the end-stop impact; for high kinetic energy loads at 500 mm/s, an external shock absorber should be added. The body retains magnetic-switch grooves, though this particular SKU ships without the internal magnet.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X60B |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N extension force needed to eject dense plastic parts from injection molding platens, utilizing the male M26x1.5 thread for secure ejector rod attachment.
Drives robust pressing operations for bearing seating or pin insertion in automotive gearbox machining, where the compact profile saves valuable Z-axis clearance.
Actuates the heavy horizontal push stroke of an automated pallet dispenser magazine, relying on NBR bumpers to arrest the 801 kgf maximum push load at the end of travel.
When sizing this 100 mm bore actuator, compare its 3927 N push at 0.5 MPa against the neighboring bores. Stepping down, the Ø80 provides 2513.2 N of push force, whereas stepping up to the Ø125 yields 6135.9 N. Remember that a standard ACQ body does not inherently hold a load if air pressure drops or the directional valve is centered—the piston will drift, and the fixed NBR bumper only decelerates the motion near the stroke end, acting neither as a lock nor a brake. To maintain vertical position without live pressure, incorporate an external rod lock or a pilot-operated check valve. To order, confirm the 100 mm bore, 60 mm stroke, PT3/8 port, male M26x1.5 rod thread, and the absence of a sensor magnet.
AirtacDistr lists every ACQ100 order code with its price on one page at https://airtacdistr.com/products/airtac-acq100-compact-air-cylinder
Quick checklist
This 100 mm bore cylinder delivers 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No. It uses fixed NBR elastomer bumpers at the stroke ends to absorb impact, which are not field-adjustable. Additionally, it does not hold its load if air is lost; the rod drifts. For fail-safe holding, an external rod lock is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.