
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X60SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X60SBT is a double-acting JIS compact cylinder engineered to deliver substantial force in a minimal axial footprint. It provides 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a hard-anodized 100 mm bore. The integrated C-clip and riveted piston-to-rod construction significantly reduces overall length compared to conventional round-body designs, making it highly effective for tight machine layouts.
This specific configuration includes an S option for a built-in piston magnet, allowing seamless integration with AirTAC reed or electronic solid-state switches via the peripheral sensor grooves. The B option equips the 32 mm rod with a male M26x1.5 thread for direct, secure load coupling. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption to prevent impact damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X60SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N push force needed to eject heavy automotive plastic parts from injection molding tools, where the male M26x1.5 thread directly mounts the ejector plate.
Drives heavy corrugated cardboard cases onto palletizing conveyors, using its 60 mm stroke and fixed NBR bumper to absorb the end-stop impact without requiring extensive machine depth.
Actuates heavy-duty gripper feeds on mechanical stamping presses, relying on the integrated magnet to trigger reed or electronic sensors for precise material indexing timing.
When sizing your pneumatic drive, consider stepping down to the 80 mm bore if your application requires less force (2513.2 N push at 0.5 MPa), or up to the 125 mm bore for heavier demands (6135.9 N push at 0.5 MPa). The ACQ100X60SBT operates at 30-500 mm/s and uses a NPT3/8 port. Keep in mind that a standard double-acting cylinder like this does not inherently hold its position if air pressure drops or the control valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or a pilot-operated check valve is required. To order, confirm the 100 mm bore, 60 mm stroke, male M26x1.5 rod thread, and the built-in magnet.
Quick checklist
At 0.5 MPa, this 100 mm bore cylinder provides 3927 N of push force and 3524.8 N of pull force. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ100X60SBT uses fixed NBR elastomer bumpers at each end to decelerate the piston, which are not field-adjustable. It is not a locking cylinder; the rod will drift if air is lost. For high-speed cycling, add an external shock absorber, and use an external rod lock if you need to hold a load without live pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.