
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X60ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X60ST is a double-acting JIS compact cylinder engineered to deliver robust linear motion within a minimal axial footprint. By utilizing a riveted piston-to-rod assembly and C-clip secured covers, this thin-body design significantly reduces overall length compared to conventional round-body units, making it highly effective for large-force tasks in space-constrained machinery. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa.
This 100mm bore variant integrates a built-in piston magnet (-S) compatible with AirTAC reed or electronic solid-state switches, fitting neatly into the sensor grooves around the body. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require external shock absorption. The unit features a 32mm piston rod and a NPT3/8 port. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X60ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the heavy 3927 N push force at 0.5 MPa needed to eject dense plastic components from injection molding tools where machine head depth is strictly limited.
Drives large bearings or shafts into housings on automated assembly lines, utilizing the 60mm stroke and fixed NBR bumper to handle the abrupt end-of-stroke impact.
Straightens and aligns heavy loaded pallets on packaging conveyors, using the integrated magnet for solid-state position feedback before the stretch wrapper engages.
When sizing this 100mm bore model, consider stepping down to the 80mm variant which yields 2513.2 N of push force at 0.5 MPa for lighter loads, or stepping up to the 125mm big-bore class which provides 6135.9 N if your application demands greater thrust. Since the ACQ100X60ST features a fixed NBR bumper rather than a locking mechanism, the rod will drift if air pressure is lost or the valve is centered; applications requiring fail-safe position holding must incorporate an external rod lock or a pilot-operated check valve. To finalize your order, confirm the 100mm bore, 60mm stroke, NPT3/8 port, the included -S magnet for sensing, and the default female M20x2.5 rod-end thread.
Quick checklist
This double-acting cylinder provides a push force of 3927 N and a pull force of 3524.8 N at 0.5 MPa. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa, with an operating speed range of 30-500 mm/s.
It relies on a fixed NBR elastomer bumper at each end to decelerate the piston, which is not an adjustable air cushion. For high-energy cycles, you should add an external shock absorber. Furthermore, it does not hold its load when air is lost; an external rod lock is required for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.