
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X60T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 60mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X60T is a double-acting JIS compact cylinder engineered for substantial actuation tasks, yielding 3927 N of push force and 3524.8 N of pull force at 0.5 MPa. Its integrated C-clip and riveted piston-to-rod architecture drastically reduce axial length compared to conventional round-body units, saving valuable machine footprint in tight assembly zones.
This 100mm bore unit incorporates a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than relying on an adjustable air cushion. The Ø32mm piston rod terminates in a standard female M20x2.5 thread, and while the body retains magnetic-switch grooves, this specific configuration ships without an internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X60T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides robust holding power for securing large injection mold halves within heavy-duty molding presses.
Actuates heavy feed mechanisms on progressive stamping lines, utilizing the 3927 N extend force to push material.
Drives heavy-duty pusher arms on automated palletizing systems to align or eject loaded pallets at conveyor transfer points.
When sizing your drive, note that the adjacent Ø80 bore provides 2513.2 N of push at 0.5 MPa for lighter demands, while stepping up is not applicable as this is the largest standard frame before the big-bore tier. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve centers; the rod will drift, and the fixed NBR bumper only decelerates near the stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe load holding. To order this unit, confirm the 100mm bore, 60mm stroke, NPT3/8 port, female M20x2.5 rod thread, and no magnet.
Quick checklist
The ACQ100X60T generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston, which is not field-adjustable. For high kinetic energy loads, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.