
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X70BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X70BT is a double-acting JIS compact cylinder engineered to deliver substantial thrust within a minimal axial footprint. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa, utilizing a 32 mm piston rod and a NPT3/8 port. This specific configuration includes a male-thread M26x1.5 rod end, allowing direct, secure mechanical coupling to your tooling.
Unlike standard round-body or tie-rod units, the riveted C-clip assembly significantly reduces overall length to conserve machine space. Deceleration at the stroke extremes is handled by fixed NBR elastomer bumpers rather than adjustable pneumatic cushions; for high-energy cycles, consider slowing the approach velocity or fitting external shock absorbers. The body retains magnetic-switch grooves, though this particular SKU ships without an internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X70BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 5497.8 N extension force available at 0.7 MPa needed to positively eject dense plastic automotive interior panels from heavy mold cavities.
Drives the automated opening and closing mechanism of large pneumatic chucks holding steel bar material, utilizing the rigid 32 mm rod to resist deflection.
Raises heavy coil steel strips into the feeding position on a servo press line, where the male M26x1.5 thread securely mounts the lifting fork.
When sizing your actuator, note that stepping down to an 80 mm bore yields 2513.2 N of push at 0.5 MPa, while moving up to a 125 mm bore provides 6135.9 N. The 100 mm bore at a 70 mm stroke offers a robust middle ground for heavy-duty positioning. Remember that a standard ACQ body will not hold a load if air pressure drops or the directional valve is centered—the rod will drift, as the NBR bumper only absorbs end-stop impact and does not function as a locking brake. For fail-safe vertical holding, an external rod lock or pilot-operated check valve is required. To order, confirm your requirements for the 100 mm bore, 70 mm stroke, NPT3/8 port, male M26x1.5 rod thread, and no sensor magnet.
Quick checklist
This double-acting cylinder provides 3927 N push and 3524.8 N pull at 0.5 MPa, and 5497.8 N push at 0.7 MPa, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in ambient temperatures from -20 to +70 C.
It uses fixed NBR elastomer bumpers at each end to absorb shock, which are not adjustable like pneumatic cushions. If air is lost or the valve is centered, the piston will drift; the bumper only decelerates the stop, it does not lock the load. An external rod lock is necessary for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.