
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X70SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X70SBT is a double-acting JIS compact cylinder engineered for heavy-duty applications within a minimal axial footprint. It delivers a substantial 3927 N push force at 0.5 MPa (extending to 5497.8 N at 0.7 MPa) across its 70 mm stroke. The riveted C-clip body design eliminates long tie-rods, significantly reducing overall length compared to round-body alternatives when space is constrained.
This specific configuration includes an integrated piston magnet (-S) for position sensing with AirTAC reed or electronic switches, and a male-thread M26x1.5 piston rod (-B) for direct load coupling. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than adjustable air cushions, so high-speed operations may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X70SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the robust 3927 N extension force needed to knock out dense plastic parts from injection moulding tools, utilizing the male M26x1.5 thread for secure ejector plate coupling.
Drives heavy pneumatic chucks on CNC turning centers where the compact 100 mm body length minimizes interference with the machine spindle while delivering reliable clamping force.
Handles the sturdy 70 mm stroke to push heavy corrugated cartons onto palletizing conveyors, relying on the integrated magnet for precise mid-stroke detection via electronic switches.
When sizing your pneumatic system, consider stepping down to the 80 mm bore for lighter loads, which provides 2513.2 N push at 0.5 MPa, or stepping up to the 125 mm bore for heavier demands, offering 6135.9 N push at 0.5 MPa. The ACQ100X70SBT is configured with a 100 mm bore, 70 mm stroke, NPT3/8 port, male M26x1.5 rod thread, and a sensor magnet.
Keep in mind that a standard double-acting cylinder like this does not inherently hold its position if air pressure drops or the valve is centered; the rod will drift. If your application requires a fail-safe load hold, you must integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
The ACQ100X70SBT has a 100 mm bore with a NPT3/8 port. It generates 3927 N push and 3524.8 N pull at 0.5 MPa, 5497.8 N push at 0.7 MPa, and a maximum push of 801 kgf at 1.0 MPa.
No, it uses fixed NBR elastomer bumpers at each end to absorb end-stop impact. It is not an adjustable air cushion, so for high kinetic energy loads, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.