
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X70ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X70ST is a double-acting JIS compact cylinder engineered to deliver substantial thrust within a minimized axial footprint. Utilizing a riveted piston-to-rod connection and C-clip assembly, this 100 mm bore model achieves a 70 mm stroke while saving critical machine depth compared to standard round-body units. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa.
This specific configuration includes a built-in piston magnet (-S) for position detection via AirTAC reed or electronic switches seated in the body grooves. The 32 mm piston rod features a default female M20x2.5 thread for secure load coupling. Deceleration at stroke ends relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption to prevent impact damage. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X70ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the heavy 3927 N push force needed to eject dense plastic parts from injection molding machinery, utilizing the 70 mm stroke to clear the mold bed efficiently.
Strips sheet metal from stamping press dies, where the compact C-clip body conserves vertical space and the 32 mm rod withstands high stripping resistance.
Actuates heavy pallet lifting platforms in packaging lines, relying on the NPT3/8 port for rapid air flow and the -S magnet to confirm vertical positioning.
Selecting this 100 mm bore involves sizing against adjacent options: stepping down to the ACQ80 provides 2513.2 N push at 0.5 MPa, while no larger standard bore exists in the main ACQ range (the big-bore series handles Ø125 and above). The ACQ100X70ST is appropriate when your application requires roughly 3927 N of extension force at 0.5 MPa within a 70 mm travel distance.
When ordering, confirm the 100 mm bore, 70 mm stroke, NPT3/8 port thread, and the built-in magnet for switch readiness. Note that the default rod end uses a female M20x2.5 thread. Because this is a double-acting cylinder, it will not hold its load if air pressure drops or the valve is centered—the rod will drift, and the fixed NBR bumper only decelerates the piston near the end of its travel, acting neither as a lock nor a brake. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The ACQ100X70ST generates a push force of 3927 N and a pull force of 3524.8 N at 0.5 MPa. At 0.7 MPa, the push force is 5497.8 N, with a maximum push capacity of 801 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and has a speed range of 30-500 mm/s.
No, the ACQ100X70ST uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not a field-adjustable air cushion; high-speed applications may need external shock absorbers. Additionally, it does not hold its load upon air loss or valve centering, so an external rod lock or pilot-operated check valve is required for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.