
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X70T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 70mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X70T is a double-acting JIS compact cylinder engineered to deliver substantial thrust within a minimized axial footprint. Utilizing a short C-clip and riveted body construction, it occupies far less mounting depth than a conventional round-body unit, yielding 3927 N of push force at 0.5 MPa and peaking at 801 kgf at 1.0 MPa. The hard-anodized bore operates with a two-way seal, while the NBR elastomer bumper at each end manages end-stop impact.
This specific configuration features a 70 mm stroke and a 32 mm piston rod with a female M20x2.5 end thread. Pneumatic supply connects via a NPT3/8 port. Although this model ships without a piston magnet, the body retains integrated magnetic-switch grooves around its circumference for future sensing upgrades. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X70T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures heavy injection mold halves during material injection, utilizing the 5497.8 N push force at 0.7 MPa to maintain rigid alignment.
Ejects thick-gauge stamped metal panels from a die, using the 32 mm rod to absorb high lateral resistance during the initial breakout phase.
Drives the heavy mechanical gripper head on an end-of-line palletizer, pushing loads into position while saving vertical machine space.
When sizing your drive, consider stepping down to the 80 mm bore for 2513.2 N push at 0.5 MPa, or stepping up to the 125 mm bore for 6135.9 N push at 0.5 MPa. Remember that a plain ACQ cylinder does not hold its load if air pressure drops or the valve is centered; the rod will drift and the fixed NBR bumper only decelerates it near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required. To order this unit, confirm the 100 mm bore, 70 mm stroke, NPT3/8 port, female M20x2.5 rod thread, and no magnet.
Quick checklist
The ACQ100X70T generates 3927 N push and 3524.8 N pull at 0.5 MPa, and 5497.8 N push at 0.7 MPa. The maximum push force is 801 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb the end stop. It is not a field-adjustable air cushion, so for high-speed or high-energy cycles, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.